As your shop front is actually the window to your company, you will want it to appear as very good as you can. Having the frames in the correct colour to match your corporate colours is important. Any miss-match with the colour of the aluminium joinery which tends to make up the store front is incorrect.
Replacing the store front will price you around $1,000 per square metre and can add up to tens of thousands of dollars. The other way to change the colour is through painting aluminium window, which is far faster and a more price efficient remedy.
The method of painting aluminium windows in a shop front, entails two major measures: Preparation and Paint Application. Each and every step can be broken down into a series of far more detailed methods. To obtain a powder coat like long lasting finish calls for specialized skill and understanding. You’ll need to have to know about two pac paints and how to apply them employing HVLP spray gun. It is very encouraged that you employ professional skilled painters, especially in the place of more than spray containment or, you may possibly finish up with an pricey clean up bill if any above spray gets onto floors and other shop fronts.
Preparation – The preparation needed for aluminium window painting in a store, front takes the most quantity of time and labour. It is only the inexperienced painter or DIY handy man that skimps on the preparation stage simply because they lack information. Skimping on the preparation stage will have an effect on the durability of the paint applied. If you want this occupation completed, of course you’ll want the very best value that includes task top quality and with the right quantity of preparation by a skilled for a fair value. This is exactly where “Window Revival” stands.
Very first point you require to do in the preparation stage is clean the frames. Do this thoroughly. The appropriate way to do this is by the wipe on wipe strategy. However, this must be done in modest sections. First, with a clean cloth, use and apply solvent this kind of as wax and grease remover/prepsol to dissolve grease and built up grim. Then, use a second clean cloth to wipe of f the dissolved grease and solvent remedy. A commercial grade scour can be utilised to get rid of built up grease and grim.
When the frames are clean, it’s critical to key the substrate up so that optimal paint adhesion is achieved. Commercial window frames are usually made up of 50mm x 50mm powder coated aluminium extruded cross section and can be sanded with an electric sander. Nonetheless, far more often than not, it is as fast to sand by hand. The substrate its condition will decide what sand paper grade to use. I advise 240 grit for powder coated surfaces that are not chalking, and 120 grit if they are followed by 60grit for anodized surfaces working down to 150 grit.
Prior to painting, just after sanding, constantly blow dust off and carry out a swift wipe on wipe off solvent clean.
Also, prior to painting, make sure that all adjacent finished surfaces such as floors and walls are appropriately masked up and protected. A commercial zip wall is acceptable when painting within a buying centre along with a mechanical extraction technique that can vent any solvent fumes. The complete method will have to be coordinated with the buying centre central management and it is most likely that all painting and preparation will have to be scheduled for outdoors hours.
Painting- It is advised that a 3 coat technique be utilised. Applying he very first coat as the primer coat. A single pac etch primer followed by two top coats of a ploy urethane accordingly. The two the primer and the leading coats ought to be applied employing a HVLP spray gun. Enable at least thirty minutes for the primer to dry and only apply a light coat. For the top coats, it is encouraged to apply 4 light coats and allow 10 minute intervals between every single coat. You can also refer to the paint makers specifications due to the fact drying occasions are highly dependent on temperature and humidity.
As soon as painting is completed, the masking can be removed and the glass can be cleaned to highlight the new alter of colour.